When it comes to measuring clearance refrigerators you should remember to give a great deal of
space around the refrigerator. However, you should not leave excess space as it would only mean loss of area, but
putting too many things around the refrigerator also means that you would bang the door into other things. The
clearance refrigerator area is vital and should be measured before installing the refrigerator.
You should try and measure the clearance refrigerator area before installing it in your kitchen.
Decide on the place where you would be keeping the refrigerator and make sure allow at least an inch of clearance
on all the sides of the refrigerator. This comprises of the two sides and the back. Of course, the front would need
more area. The next step that you should implement is to measure the width of the space along with the depth and
the height of the refrigerator.
The clearance refrigerator area is vital for those kitchens which have slightly lower ceilings or
the area where you keep the fridge is slightly lower. The best way to measure the height of the clearance
refrigerator would be considering the hinge cap. This is the covering that caps the upper portion of your door
hinge. Generally most of the companies tend to list or mention height of the refrigerator. This is listed both with
and without the hinge measurement. As the hinge cap is situated near the front it can be a problem in cases the
upper cabinets aren’t recessed. This hampers the opening.
You should also make sure that the clearance refrigerators near the walls. Often the doors of the
refrigerators do bang a lot against the side walls. You need to check if the door of the refrigerator can be opened
as a complete ninety degrees. The rule of the thumb is that if you are placing a refrigerator against a side wall,
then the fridge must be at least three inches narrower than its opening.
The clearance refrigerator area also includes the space that you will move it through. For
instance, the doorways of your home and the passage have to be measured. If the refrigerator is almost the size of
the passage then both the walls and your refrigerators would slash against each other. It is safer to keep a
minimum gap or clearance of 2 inches. However, the larger the clearance refrigerator areas the better it is for
Some of the other factors that you should keep in mind here include the care and maintenance of the
refrigerator. The clearance refrigerators should have provisions for cleaning. So if you keep it very close to
other objects the mop or you hand won’t be able to pass through. Apart from this generation of heat is vital for
refrigerators. Placing it too close to any other object would mean that heat cannot be emitted properly and this
may need to malfunction of the refrigerator or it can also get spoilt much